Phenom High-Resolution Spectrometer

Models and specifications

Values are taken from the Phenom High-Resolution Spectrometer datasheet. For a specification not listed here, ask an applications engineer.

1. PN1050: Range 535–565 nm or 535–650 nm, customizable within 400–1000 nm. 16-bit A/D.
2. PN1080: Shares specifications with PN2080. Range 535–565 nm or 535–650 nm, customizable within 400–1000 nm. 16-bit A/D.
3. PN2080: Shares specifications with PN1080.
4. PN2570: NIR model, customizable within 900–1700 nm. 16-bit A/D.

A dash means the value is not specified for that model. An applications engineer can help with any specification not listed.

Common to every model

Integration time

0.1 ms - 65 s (model dependent)

A/D converter

16

Interface

USB 2.0 High-Speed (480 Mbps)

Connector

SMA905 or FC/PC (ferrule length < 9.812 mm)

Operating temperature (°C)

0 to 50

Storage temperature (°C)

-30 to 70

Humidity

0-90% non-condensing

Dimensions (mm)

180 (L) x 175 (W) x 60.7 (H)

Power

+5 VDC, 300 mA via USB; voltage range 4.75-5.25 V

Gratings

1500 g/mm @ 600 nm, 2400 g/mm @ 300 nm (PN); 830 g/mm @ 1200 nm (PN-NIR)

Slits

10 µm or 25 µm

Optics

T-R-T Czerny-Turner design with 2nd & 3rd order rejection; f/# 5.0, NA 0.1, focal length (R1-R2) 85-101.5 mm

Stray light

0.2%

Digital I/O

Six 3.3 V pins (GPIO, UART TX/RX, light source control, external trigger); external 8-pin I/O port

Trigger modes

Single, multiple, and software trigger with programmable delay

Buffering

Up to 4,000 spectra in ring-buffer mode

Calibration storage

Flash ROM (wavelength, linearity and intensity coefficients)

A/D conversion rate

15 MHz